Laserscript user forum

The machine was delivered to me and setup for me by the HPC laser guy, The chap that installed the machine did not give me a disk because he only brought his own install disk. it's a real pain not being able to use the laser now. I will email HPC direct and see if they can help

thank you

I am trying to connect my 6540H to a new laptop with windows10 (The old machine has died ) but I can not get it to find the drivers despite copying eveything onto the new hardrive.

Is there a link I get to obtain the drivers for windows 10 please?

Cheers
John

It seems in this case that something internal was stuck, a bit of squeezing of the flexible tube each side of the sensor seems to have free it up now, Re BYPASS, totally understand why it should not be posted, I have some experience of high voltage PSU’s gained from working In TV repair industry and...

Thanks Spooky and ncamacho2000 for the replies, I believe I have traced the fault to the FLOW SENSOR, so now need to identify replacement etc. I am wondering if an alternative design of float sensor is available?? it seems as though this part may be a weakness in these devices. It seems plausible to...

I have looked at NCAMACHO200 previous post but still unable to identify the fault with my 6540H New tube fitted 6 months ago with less than 10 hours actual use. Unit left standing for 4 months unused Lasercut software works fine and everything downloads ok Front panel says laser 100%/100% After goin...

Hi if anybody has info about setting up and using the rotary attachment on the 6840 it would be greatly appreciated.

Can anybody help me with setting up the Rotary device to experiment with etching glasses etc ?
My collegue collected one yesterday from HPC at the NEC but she did not get any instructions etc.
Thanks for any help.
Cheers
John

Just wanted to say a big thank you to Chris for getting us the 6840 up and running. Great Job and will post some of our work in due course.

Cheers

Thank you so much for doing that test Spooky, It seems from that it will be more than adequate for our needs, thanks again.

Cheers

Hi, My Company is considering the purchase of the LS6840, I notice that the spec says smallest character is 1mm x 1 mm does this then mean the thinnest slot that this machine will produce is 1mm wide? We would really like to be able to cut some slots of 0.5mm and 2 or 3 mm long. Thanks in advance to...