That's a great idea, I can see uses for that.
These people have used a similar technique to achieve some spectacular effects. Needs an automated Z axis:
http://www.youtube.com/watch?v=arjRtCjI ... =endscreen
Richard
Search found 10 matches
- Thu May 30, 2013 11:17 pm
- Forum: General Discussion
- Topic: Using your laser as a line bender
- Replies: 5
- Views: 8143
- Tue Feb 26, 2013 6:00 pm
- Forum: Help or advice required please
- Topic: Engraving deeper at same temp.
- Replies: 9
- Views: 10165
Re: Engraving deeper at same temp.
Hmmm, the experts have been quiet today so maybe I should chip in! I've not had this problem, but from my experience your scan gap looks very small. With those settings engraving the plaque pictured must take days! I think you may be going over the same area of hot acrylic again and again as the sca...
- Tue Dec 18, 2012 7:07 pm
- Forum: General Discussion
- Topic: An idea for the tinkerers or the manufacturers?
- Replies: 1
- Views: 3732
An idea for the tinkerers or the manufacturers?
While cleaning my optics (in an LS6840) it occurred to me that the aperture in the head below the lens is continuously pressurised by the air assist, so no smoke or debris can get in. The aperture above the head doesn't have this, so gunk can easily drift in and settle on the mirror and particularly...
- Tue Dec 18, 2012 6:57 pm
- Forum: General Discussion
- Topic: Laser script cut/hole/engrave/hole engrav
- Replies: 11
- Views: 15515
Re: Laser script cut/hole/engrave/hole engrav
In contrast to Daven, I do use Coreldraw (Version X4) and don't use Lasercut (apart from the Coreldraw plugin) so I'm not familiar with the ins and outs of that software (and pretty new to Coreldraw to be honest). The way it works in Coreldraw is that you create your design in Coreldraw, then click ...
- Mon Nov 26, 2012 11:55 am
- Forum: Help or advice required please
- Topic: Best wood for engraving & cutting
- Replies: 4
- Views: 7474
Re: Best wood for engraving & cutting
I just came across this on another forum: http://www.sawmillcreek.org/showthread.php?194546-Paint-for-filling-engravings-on-wood (In brief, it's about engraving wood, filling the engraved holes with a coloured material and cleaning off the unengraved surface). Interesting ideas. It might be the answ...
- Fri Nov 23, 2012 10:45 am
- Forum: Help or advice required please
- Topic: Best wood for engraving & cutting
- Replies: 4
- Views: 7474
Re: Best wood for engraving & cutting
Sounds like a familiar problem. If you're like me you're also looking for something that can engrave quickly, looks attractive and doesn't cost much! If you play with different settings you should be able to get a dark engrave on laser ply. I've got a series of test files I run on every new material...
- Sun Nov 11, 2012 5:04 pm
- Forum: Help or advice required please
- Topic: Is my Lasercut 5.3 Haunted?!
- Replies: 3
- Views: 5456
Re: Is my Lasercut 5.3 Haunted?!
Some good news on this one. I saved the Coreldraw file that was causing problems in a new directory, clicked 'Laser Output' and it worked perfectly. If there's a ghost that suggests it must be hiding in the various files that get created automatically alongside the Coreldraw file. However, when I go...
- Sun Nov 11, 2012 4:46 pm
- Forum: Login and say Hello
- Topic: Hello from Cardiff
- Replies: 6
- Views: 8853
Re: Hello from Cardiff
Thanks for the welcomes folks! I was wondering chillers people were using. There's an old post somewhere from johnb80 (who seems to have disappeared) describing an improvised version which looked interesting but if I wasn't using purpose built kit I'd want to be very careful not to risk putting icy ...
- Fri Nov 09, 2012 7:00 pm
- Forum: Help or advice required please
- Topic: Is my Lasercut 5.3 Haunted?!
- Replies: 3
- Views: 5456
Is my Lasercut 5.3 Haunted?!
I've had a LS 6040 since July, which I'm using with Coreldraw X4, Lasercut 5.3 running on Windows XP. I'm finding the software a bit temperamental. Sometimes I get a 'Softdog no same' error or a failure of the PC to connect to the machine, I try a few reboots and unplugging / replugging, rub it with...
- Fri Nov 09, 2012 6:38 pm
- Forum: Login and say Hello
- Topic: Hello from Cardiff
- Replies: 6
- Views: 8853
Hello from Cardiff
I've had my LS6840 since the end of July, since when I've been learning how to use it, finding problems, finding solutions, getting distracted, developing designs, making smoke, making scrap and some progress. What I've not done is spent much time on the forums, but now I've found my password and fo...