Laserscript

Fixed all my current problems - had the laser tube replaced! Had forgotten how quick and easy cutting could be! Nothing that money couldn't fix!!

Morning! Thanks for that. The coolant flow seems to be fine with no air bubbles etc. I'm not quite sure what I am looking for when you refer to the output coupler mirror. The first mirror the beam hit seems nice and clean but I think you are referring to something inside the tube near the end? There...

I have been having further issues cutting 3mm ply with my LS3020 which I had down to variances in the quality of the wood, but I am beginning to wonder if other factors are at play. Out of exasperation I upped the power to 80/80% and increased the speed to 30% (For two years I had cut at 22% speed a...

Hi Dave - who do you buy your ply from please? Regards, Richard

Is there anyone else having persistent trouble cutting 3mm birch ply? For quite a while now I have had to change my settings virtually every sheet. Not only that I can have several similar cuts side by side and some cut through and some don't. For a couple of years I had the same settings day in day...

This isn't an issue directly concerned with cutting, but am wondering if anyone knows enough about Windows to offer advise. My cutting PC just underwent an unavoidable major Windows 10 upgrade. The first issue was Lasercut 5.3 wouldn't open but Chris from HPC solved that by advising I now need to si...

No, sorry, other way round, 71.5mm!!

Good thought. Just to clarify, if I am cutting 3mm Perspex and my focal distance is normally 73mm I should increase this to 74.5mm?

Best regards, Richard

I am now experiencing an issue that is really only apparent when cutting Perspex in that the cut is slightly bevelled - only a small amount, but when it comes to glue-welding pieces together there is only marginal contact. It would seem obvious that the laser is not exactly square with the table, bu...

HaHa! I didn't really think there was a simpler way!