Search found 8 matches
- Wed Mar 04, 2015 8:49 pm
- Forum: Help or advice required please
- Topic: HPC 2030pro Laserply help ?.
- Replies: 14
- Views: 13884
Re: HPC 2030pro Laserply help ?.
Just researching, looks like 'medite' is the de facto laser MDF product, cheap too.
- Wed Mar 04, 2015 8:26 pm
- Forum: Help or advice required please
- Topic: HPC 2030pro Laserply help ?.
- Replies: 14
- Views: 13884
Re: HPC 2030pro Laserply help ?.
You won't be able to cut 6mm ply or mdf on the 3020 really well - you will need better air assist at least and good clean and aligned mirrors - even good extraction. I will only cut up to 6mm on my 3060 with a 60w tube and that is using the best available Ply. Best Dave Thanks, the manual has hardb...
- Mon Mar 02, 2015 7:18 pm
- Forum: Help or advice required please
- Topic: HPC 2030pro Laserply help ?.
- Replies: 14
- Views: 13884
Re: HPC 2030pro Laserply help ?.
Tried -briefly - today. Can cut 6mm ply or MDF but burns. If I turn power down (as per the manual settings) then it does not even Mark the material.
Nick
Nick
- Sun Mar 01, 2015 11:44 am
- Forum: Help or advice required please
- Topic: HPC 2030pro Laserply help ?.
- Replies: 14
- Views: 13884
Re: HPC 2030pro Laserply help ?.
We had a quick demo but only cut plastic.
- Sat Feb 28, 2015 7:47 pm
- Forum: Help or advice required please
- Topic: HPC 2030pro Laserply help ?.
- Replies: 14
- Views: 13884
Re: HPC 2030pro Laserply help ?.
Ok, will try Monday. It's a school machine so can't play till then.Tom wrote:3mm laser ply should cut at about sp20 and about 10 Ma on your machine
Will post back when I get the settings right.
- Sat Feb 28, 2015 7:39 pm
- Forum: F.A.Q’s & Tutorials
- Topic: Cutting 3mm perspex
- Replies: 8
- Views: 16314
Re: Cutting 3mm perspex
If the cut parts are fused at the end of the cutting, then maybe not enough extraction. As extraction cools the material when it sucks the air passed. I cut with card under the acrylic and quite a bit of liquid is absorbed and there is a fire risk, whereas without the card underlay, no problems. The...
- Sat Feb 28, 2015 7:33 pm
- Forum: Help or advice required please
- Topic: HPC 2030pro Laserply help ?.
- Replies: 14
- Views: 13884
Re: HPC 2030pro Laserply help ?.
Machine has run for an hour or two. New in May 2014. We have tried many different settings. After googling a bit, I am going to try MDF for cutting, cheaper anyway!
Nick
Nick
- Sat Feb 28, 2015 6:45 pm
- Forum: Help or advice required please
- Topic: HPC 2030pro Laserply help ?.
- Replies: 14
- Views: 13884
HPC 2030pro Laserply help ?.
We have found that we can cut and engrave acrylic perfectly. But using the re-cut focus tool at 53mm not the 60mm supplied with the machine. We set the focus tool at the position as supplied in the manual. This picture shows the position that the manual tells you to use, we have cut a new tool at 53...