Laserscript user forum

I think it's too keep all the settings simple i.e why run at 65% of 100% when you can just type in 65% in laser cut
I don't run above 90% myself so i never type more than 90 in laser cut

Hi Sam, 8.3 file format is where the file name is made up of 8 ASCII characters a dot and then 3 ASCII for the extension so example test1234.ecp The menu on the panel is mainly maximum - so if you set the power to 90% the tube will always be 90% even if the LC file is 100% - I would leave the setti...

If that pic is looking over the machine then the water needs to be running from right to left
if you turn the pump off and gently lift the opposite side from the bubble too get it moving

Sam
Don't turn the tube or move it
I think you need to talk too hpc

Just don't forget too turn it on
or you just turn the machine on for a bit before you start working

It will go in
The orange bit is covering the terminals
Just give it a wiggle with steady pressure

I think your right
You'll be watching the laser work though the same screen and i don't think you need glasses for doing that

Hi Sam
You shouldn't be able to fire the laser with the lid up so no need for glasses

Get in touch with Chris at hpc
But im guessing it's new motherboard time

I'd emailed Chris last and he said he had been in contact with someone with the same problem
so assumed it was you
Glad your sorted