Hi All,
I have an LS6840 Pro machine, and whilst doing a routine clean of the mirrors and lens I thought I would check the calibration of the two laser pointers for focus length.
I looked online and saw reference that the optimum distance from workpiece to step above air assist cone should be 41mm, however the focus tool that I got with the machine is 57mm.
Could someone please clarify the correct height for me?
Thanks
Paul
HPC LS6840 pro focus length clarification
-
- Posts: 1
- Joined: Thu Apr 07, 2016 10:23 pm
- Contact:
Who is online
Users browsing this forum: No registered users and 15 guests