Aztec engrave on weird card

Moderators: HPC, Daven

Post Reply
Pedro_Hernandez
Posts: 184
Joined: Thu Dec 09, 2010 8:54 pm
Location: Hertfordshire
Contact:

Aztec engrave on weird card

Post by Pedro_Hernandez »

I dug this out recently on a job that I did a while back.

The stock card has a weird rubberised texture and originaly was given it to do a cut into but it left a oily residue that stained the edges.

By accident I discovereed that a fast enough cut and low speed would leave a white mark and aan engrave was even better.

I'll post the make and code when I can find it and post it here.

Image

Regards

Peter
HPC1290 User HPC 3020 Owner
tweakie
Posts: 146
Joined: Fri May 06, 2011 9:29 am
Location: UK
Contact:

Re: Aztec engrave on weird card

Post by tweakie »

That's nice Pete, what diameter is it please ??

Tweakie.
Pedro_Hernandez
Posts: 184
Joined: Thu Dec 09, 2010 8:54 pm
Location: Hertfordshire
Contact:

Re: Aztec engrave on weird card

Post by Pedro_Hernandez »

tweakie wrote:That's nice Pete, what diameter is it please ??

Tweakie.
aprox 80mm

Regrds

Peter
HPC1290 User HPC 3020 Owner
tweakie
Posts: 146
Joined: Fri May 06, 2011 9:29 am
Location: UK
Contact:

Re: Aztec engrave on weird card

Post by tweakie »

Thanks. If you do come across the dxf or code, I would like to try that.

Tweakie.
Pedro_Hernandez
Posts: 184
Joined: Thu Dec 09, 2010 8:54 pm
Location: Hertfordshire
Contact:

Re: Aztec engrave on weird card

Post by Pedro_Hernandez »

tweakie wrote:Thanks. If you do come across the dxf or code, I would like to try that.

Tweakie.
I've got the dxf, but its a huge file for some reason at around 7mb.

Peter
HPC1290 User HPC 3020 Owner
tweakie
Posts: 146
Joined: Fri May 06, 2011 9:29 am
Location: UK
Contact:

Re: Aztec engrave on weird card

Post by tweakie »

Perhaps not then.

Thanks for looking Peter.

Tweakie.
Pedro_Hernandez
Posts: 184
Joined: Thu Dec 09, 2010 8:54 pm
Location: Hertfordshire
Contact:

Re: Aztec engrave on weird card

Post by Pedro_Hernandez »

tweakie wrote:Perhaps not then.

Thanks for looking Peter.

Tweakie.
I've zipped it down to about 900kb, wont let me upload it though as its over 256kb.

PM me an email address and I'll email it as a zipped.

Peter
HPC1290 User HPC 3020 Owner
Pedro_Hernandez
Posts: 184
Joined: Thu Dec 09, 2010 8:54 pm
Location: Hertfordshire
Contact:

Re: Aztec engrave on weird card

Post by Pedro_Hernandez »

Pedro_Hernandez wrote:
tweakie wrote:That's nice Pete, what diameter is it please ??

Tweakie.
aprox 80mm

Regrds

Peter
Just found the file, its 75mm
HPC1290 User HPC 3020 Owner
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 5 guests