Hello
I am getting double lines when using the laser, have cleaned, and realigned mirrors and lens.
Still getting it, even on the tape on the bottom under the lens you get a hole and a crescent next to the hole ? a
Any help most gratefully received
Double lines ?
-
- Posts: 4
- Joined: Tue Jul 17, 2018 8:20 pm
- Contact:
Double lines ?
LS3040 lasercut 6.1
Re: Double lines ?
Is the beam centred in the air assist nozzle? Put tape on the bottom and do a test - it may be hitting the side.
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Who is online
Users browsing this forum: Ahrefs [Bot] and 1 guest