Have Speed /Feed/Temperature settings delivered

Moderator: Admin

Daven
Posts: 1337
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby Daven » Wed Sep 07, 2011 10:07 pm

I wonder if it is to do with the board - my 3020 gives the same sort of performance yet I have not adjusted or even checked the alignment since buying it. Used it quite regularly and only just started to use a chiller.

The chiller didn't make much of a difference to speed TBH, just lets me use the machine all day without worry.

Maybe the ND boards control the laser a bit more efficiently?

Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC

Spooky
Posts: 1312
Joined: Mon Apr 26, 2010 10:17 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby Spooky » Wed Sep 07, 2011 10:33 pm

No idea Dave, the 6840 has a peak 60Watt PSU in it so that should give the best results of any 40watt machine (its not going to be pumping underpowered)

It just seems weird that the 3020 seems to cut so well compared to the bigger machines. Hummm must admit my first tube in the 6840 performed very well, lasted ages and never let me down.

strange things indeed :)
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk

MarkP
Posts: 10
Joined: Mon Mar 26, 2012 1:28 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby MarkP » Sat Aug 25, 2012 6:26 pm

Hi Dave,

If you still have this speed/feed settings table, could you send to me too please.


Mark.
LS6840 running Lasercut v5.3

Daven
Posts: 1337
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby Daven » Sun Aug 26, 2012 9:27 am

Hi Mark,

Dave is in the middle of moving so may not get to see this post - I'll have a word when I speak next ;)

Cheers

Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC

MarkP
Posts: 10
Joined: Mon Mar 26, 2012 1:28 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby MarkP » Sat Sep 01, 2012 7:53 pm

Daven wrote:Hi Mark,

Dave is in the middle of moving so may not get to see this post - I'll have a word when I speak next ;)


Thanks Dave, much appreciated.


Mark
LS6840 running Lasercut v5.3

Chrisuk70
Posts: 2
Joined: Mon Oct 07, 2013 5:07 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby Chrisuk70 » Sun Aug 16, 2015 12:11 pm

Hello. You said it works on an iPad. Will it work on my MacBook Pro? If so, I would love to have a copy please.

Spooky
Posts: 1312
Joined: Mon Apr 26, 2010 10:17 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby Spooky » Sun Aug 16, 2015 7:20 pm

Hiya Chris, no it doesn't sadly :(

I will be updating the app to be cross platform though when time permits :)
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk

TimBobTastic
Posts: 154
Joined: Sun Jan 18, 2015 6:38 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby TimBobTastic » Fri Sep 04, 2015 11:43 am

Spooky... Are you still offering this software / service? I would love to have a copy.... if at all possibly...

Regards
Tim
LS3060 PLUS with a 60w tube, Chiller and Bofa filter :-)
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com

Spooky
Posts: 1312
Joined: Mon Apr 26, 2010 10:17 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby Spooky » Sun Sep 06, 2015 9:19 pm

Not until I get roof repairs finished on my house :)
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk

TimBobTastic
Posts: 154
Joined: Sun Jan 18, 2015 6:38 pm
Contact:

Re: Have Speed /Feed/Temperature settings delivered

Postby TimBobTastic » Mon Sep 07, 2015 2:01 pm

:D I have a bucket, if that helps? ;)
LS3060 PLUS with a 60w tube, Chiller and Bofa filter :-)
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com


Return to “Useful Information Quick reference”

Who is online

Users browsing this forum: No registered users and 2 guests