Material Supplies

Moderators: HPC, Daven

bobg
Posts: 98
Joined: Fri Jan 21, 2011 4:08 pm
Contact:

Re: Material Supplies

Post by bobg »

Only one needed - I'll keep it in a 'see through' portion of ducting used for extraction! :lol:

Bob
LS3020 used for hobby - making model railway buildings/signals etc.
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: Material Supplies

Post by Daven »

LOL - didn't think of that :lol:
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Natalie
Posts: 18
Joined: Sun Nov 20, 2011 8:37 pm
Location: Manchester
Contact:

Re: Material Supplies

Post by Natalie »

bobg wrote:I'm just off to the pet shop to buy a canary and a cage I can keep near the laser!

Bob
hahahaha

I have a very good warning system, in the form of a Health and Safety Nazi stomping up the corridoor if something smells too bad ;)

Has anyone bought the HPC bundle? Do you get a good range? I was just about to buy a few A4 sheets of different colours and then I saw the bundle. Also what are your opening times (to send the husband to collect)
LS 6090 user
endcan
Posts: 60
Joined: Sat Jan 21, 2012 11:39 am
Contact:

Re: Material Supplies

Post by endcan »

After a visit to HPC They stock:
Thermark paste and spray.
3mm clear cast perspex
5mm clear cast perspex
10mm clear cast perspex

3mm live edge and 3mm basic colours

5mm pink and purple vario perspex

1.5mm and 3mm laserable engraving laminate.
also mr Chris was talking about a new product a laserable pour on (brush on mask)
see www.hpclaser.co.uk
Personalised bike bitz,Metal marking,adhesive decals
Chrisj
Posts: 4
Joined: Sun Apr 29, 2012 4:40 pm
Contact:

Re: Material Supplies

Post by Chrisj »

NEW LASER PLY at HPC...
Just to let you know we have just had delivered a new pallet of laser ply with a really good surface finish that cuts at around 35% faster than our normal laser ply with a faun coloured edge All for the same price,
Ask the office for samples if you wish to speed up your craft cutting.
Chris ;)
robburge@sky.com
Posts: 48
Joined: Sat Oct 16, 2010 4:10 pm
Contact:

Re: Material Supplies

Post by robburge@sky.com »

Hobarts are now selling 1mm clear cast acrylic - very useful stuff, so I've ordered some

Rob
JohnStevenson
Posts: 12
Joined: Sat Jul 28, 2012 10:18 am
Contact:

Re: Material Supplies

Post by JohnStevenson »

Found a supplier of ABS at decent prices.

http://www.plastic-sheets.co.uk/ecommer ... &q=Any&c=3

Usual no connection with the company.
John Stevenson, Nottingham, England.
LS 3040 Pro, Techo Isel Router, Vectric software.
Lightnin
Posts: 152
Joined: Wed Feb 25, 2015 2:50 pm
Contact:

Re: Material Supplies

Post by Lightnin »

BUMP :mrgreen:
as it seems useful !
Lightnin
Posts: 152
Joined: Wed Feb 25, 2015 2:50 pm
Contact:

Re: Material Supplies

Post by Lightnin »

Travis Perkins for Medite MDF :-)
Kirsty
Posts: 18
Joined: Tue May 28, 2019 8:23 am
Contact:

Re: Material Supplies

Post by Kirsty »

Just wanted to add to this:
Kitronik is the supplier that I often use for plywood, but they've also just introduced bamboo, plus they have a range of acrylic.
I think they're good.
Happy lasering x
Kind regards
Kirsty x
HPC laser 3040, 40W
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests