i have managed to install newlydraw onto windows 7 (at least all seems to be working - have tried loading newlydraw on to xp mode of windows 7 but it isnt recognising the dongle for somereason?) i think all i'm missing is the usb drivers and it should work - but i cant remember where the usb drivers came from originally
any one any suggestions
drivers for 3060
-
- Posts: 10
- Joined: Sat Nov 07, 2009 1:25 pm
- Contact:
Re: drivers for 3060
On my 3020 they were on the newlydraw software disc.
http://www.tmbelectronics.com - Electronics, tools, hobby tools, power tools, and much more!
An ex LS3020 user now playing with an LS6840PRO (60W) and an LS1290PRO (80W)
An ex LS3020 user now playing with an LS6840PRO (60W) and an LS1290PRO (80W)
-
- Posts: 10
- Joined: Sat Nov 07, 2009 1:25 pm
- Contact:
Re: drivers for 3060
hi i found the drivers thanks - newlydraw seems to be working in windows 7 - but having a bit of an issue cutting - i can open the software jog the laser head around but when i press for it to cut i get link 5 error
Any suggestions
Thank you for your reply
Any suggestions
Thank you for your reply
Re: drivers for 3060
I could get ND to run on Win7 but not the laser drivers - if you find a way let me know
Cheers
Dave
Cheers
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: drivers for 3060
from memory the 3020 driver card isn't compatible with win7,
best wishes
Dave
best wishes
Dave
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Dave@OpticalPower.co.uk
-
- Posts: 10
- Joined: Sat Nov 07, 2009 1:25 pm
- Contact:
Re: drivers for 3060
have since found it its a user specific thing the drivers must have installed under myuser name only - which is strange as newly draw works for all users.
the drivers installed fine????? - i have noticed an issue with 7 that if you install drivers following instructions it seems not to work - it tells you that it hasn't installed propperly - then gives you the option to install using recommended settings - hope that helps has helped for me in the past
That problem happened with all the graphtec drivers i installed.
Thanks for your replies and help
the drivers installed fine????? - i have noticed an issue with 7 that if you install drivers following instructions it seems not to work - it tells you that it hasn't installed propperly - then gives you the option to install using recommended settings - hope that helps has helped for me in the past
That problem happened with all the graphtec drivers i installed.
Thanks for your replies and help
Who is online
Users browsing this forum: No registered users and 0 guests