Hi
I am new to this forum and wondered if any of you guys can help me.
I have just brought a ls4020, the machine is great and i am very pleased with it.
but i am so confused when i try and set the bed size to max which is A4 it still trys to cut on the metal casing.
The software (newly draw) is so confussing when you go to the parameters settings, there are 8 pictures of the x y axis
but i dont seem to be able to get it to start at top left it is set at top right as it keeps going there no matter what i do.
I brought a laser 2 years ago and sold it as i had similar problems with setting it, i really want to learn to use this machine can someone please help me with this i am gettig so confussed and frustrated, i followed all instructions in the manual, and still it wont do what i want it t do.
Any help will be welcome
thanks
michelle
LS4020
-
- Posts: 3
- Joined: Sat May 29, 2010 9:23 pm
- Contact:
Re: LS4020
Thank you so much for this, i will go and input these settings now.
i was getting so frustrated, all i managed to do was cut on the metal casing,
i suppose at least its easy to identify if someone steals it LOL........
many thanks again
Michelle
i was getting so frustrated, all i managed to do was cut on the metal casing,
i suppose at least its easy to identify if someone steals it LOL........
many thanks again
Michelle
-
- Posts: 3
- Joined: Sat May 29, 2010 9:23 pm
- Contact:
Re: LS3020
OK
i input the settings you gave me and it still goes crazy.
i have settings as follows
A4 w308 h220
model is set at jsm40U as stated in manual
device setting is top row 3rd from left
engrave setting x 2mm y 92mm
material along back edge long ways and short side down right edge.
when i go to cut a box comes up and says material is out of machine.
if i draw a box it scrapes along edges and goes around whole machine.
i have to stop machine as it is still trying to start over the metal casing.
i input the settings you gave me and it still goes crazy.
i have settings as follows
A4 w308 h220
model is set at jsm40U as stated in manual
device setting is top row 3rd from left
engrave setting x 2mm y 92mm
material along back edge long ways and short side down right edge.
when i go to cut a box comes up and says material is out of machine.
if i draw a box it scrapes along edges and goes around whole machine.
i have to stop machine as it is still trying to start over the metal casing.
-
- Posts: 23
- Joined: Sat May 22, 2010 2:59 pm
- Contact:
Re: LS4020
Hi Mechelle,
I've might be talking rubbish, but, I've just looked at CNC Zone.com and there is some mention of Newly Draw not working with Vista or ME but it states that it works with XP. Any help
Trev
I've might be talking rubbish, but, I've just looked at CNC Zone.com and there is some mention of Newly Draw not working with Vista or ME but it states that it works with XP. Any help
Trev
Re: LS4020
Trev,
Try right clicking and select compatibility mode then select one of the earlier OS types
best wishes
Dave
Try right clicking and select compatibility mode then select one of the earlier OS types
best wishes
Dave
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Dave@OpticalPower.co.uk
Re: LS4020
Hi The 3020 settings in the engrave window can be set by you the reset xy is machine datums dont cut from here always click to x,y button.set these to suit yoiur machine. a friend of mine steve has one we set it at -60 and 0 to get the position.
thanks bob
thanks bob
Who is online
Users browsing this forum: No registered users and 0 guests