Something cheap to do small boxes that slot together for small parts to fit inside drawers in a workshop.
Many thanks.
Looking for some cardboard box software
-
- Posts: 12
- Joined: Sat Jul 28, 2012 10:18 am
- Contact:
Looking for some cardboard box software
John Stevenson, Nottingham, England.
LS 3040 Pro, Techo Isel Router, Vectric software.
LS 3040 Pro, Techo Isel Router, Vectric software.
Re: Looking for some cardboard box software
http://boxmaker.rahulbotics.com/
All I can offer!
You will need a pdf to dwg converter, then you will need to scale it in cad using the bounding box.
All I can offer!
You will need a pdf to dwg converter, then you will need to scale it in cad using the bounding box.
http://www.tmbelectronics.com - Electronics, tools, hobby tools, power tools, and much more!
An ex LS3020 user now playing with an LS6840PRO (60W) and an LS1290PRO (80W)
An ex LS3020 user now playing with an LS6840PRO (60W) and an LS1290PRO (80W)
-
- Posts: 12
- Joined: Sat Jul 28, 2012 10:18 am
- Contact:
Re: Looking for some cardboard box software
Thanks, book marked it for later but was wanting cardboard boxes, probably quicker to design my own.
I'm sure I saw a similar site but just for boxes ?
Incidentally V Carve Pro and Cut 2D from Vectric will open a PDF file and then export it to a DXF with out doing any work.
I don't have Corel draw and use V carve for all my design work then load into Lasercut.
I'm sure I saw a similar site but just for boxes ?
Incidentally V Carve Pro and Cut 2D from Vectric will open a PDF file and then export it to a DXF with out doing any work.
I don't have Corel draw and use V carve for all my design work then load into Lasercut.
John Stevenson, Nottingham, England.
LS 3040 Pro, Techo Isel Router, Vectric software.
LS 3040 Pro, Techo Isel Router, Vectric software.
-
- Posts: 12
- Joined: Sat Jul 28, 2012 10:18 am
- Contact:
Re: Looking for some cardboard box software
To answer my own post [ sign of a demented mind ? ] with some help from the Sawcreek forum, Matt over there suggested that Inkscape had a built in extension to do this. Extension > Raster > Fold box
John Stevenson, Nottingham, England.
LS 3040 Pro, Techo Isel Router, Vectric software.
LS 3040 Pro, Techo Isel Router, Vectric software.
Who is online
Users browsing this forum: No registered users and 0 guests