Could anyone out there advise me, on what the kiss cut setting should be for 3mm perspex, I have a 60w 6840 thanks in advance.
Chris
kiss cut setting for 3mm perspex
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: kiss cut setting for 3mm perspex
Depends how deep it needs to be but try speed 30 at power 15
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: kiss cut setting for 3mm perspex
Don't forget about the corner power
Speed 25/50 power 15/20 corner power a couple of %less
Speed 25/50 power 15/20 corner power a couple of %less
-
- Posts: 159
- Joined: Thu Apr 03, 2014 10:17 pm
- Contact:
Re: kiss cut setting for 3mm perspex
Hi I kiss cut 3mm Perspex, S:30 P:18 with great results on our 60W 6840.
60W LS6840 & CW4000
started out with LS3040
started out with LS3040
Who is online
Users browsing this forum: Ahrefs [Bot] and 2 guests