Just accidentally discovered that ctrl+G opens the size/scale options in LaserCut.
This will shave seconds off my processing times so thought I'd share.
Any other useful LaserCut shortcuts?
LaserCut 5.3 Shortcuts
-
- Posts: 159
- Joined: Thu Apr 03, 2014 10:17 pm
- Contact:
LaserCut 5.3 Shortcuts
60W LS6840 & CW4000
started out with LS3040
started out with LS3040
Re: LaserCut 5.3 Shortcuts
Shift J = pick
Ctrl Y = centre to table
Zoom out = F3
Zoom to objects = F4
Zoom to Table shift = F4
Array F9
They are noted in the menus
Ctrl Y = centre to table
Zoom out = F3
Zoom to objects = F4
Zoom to Table shift = F4
Array F9
They are noted in the menus
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 159
- Joined: Thu Apr 03, 2014 10:17 pm
- Contact:
Re: LaserCut 5.3 Shortcuts
Daven wrote:They are noted in the menus
Sometimes I overlook the most obvious things.
60W LS6840 & CW4000
started out with LS3040
started out with LS3040
Re: LaserCut 5.3 Shortcuts
me too
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Who is online
Users browsing this forum: No registered users and 1 guest