Lasercut Help Required
-
Bluestorms
- Posts: 13
- Joined: Thu Dec 20, 2018 7:15 pm
- Contact:
Lasercut Help Required
Hi, I had to re register as I couldnt login any more, anyway I have just bought a HPC3060 pro at a price I could not say no to. The person who I bought the machine from says they may have the dongle when they have cleared out the room that it was in, but will have to wait about 2 weeks and they are not 100% sure they have it. Is there a way I can run laser cut on windows 7 without the dongle? I emailed HPC last Thursday but have not heard back from them yet. The machine is only 2 years old, hardly used and was purchased brand new from HPC. Thanks for your help.
Re: Lasercut Help Required
We moved the forum to a new host a while back so may have lost some data!
HPC office is closed from 20th to the 2nd Jan.
There is no way to run LaserScript without the Dongle I'm afraid!
Best
Dave
HPC office is closed from 20th to the 2nd Jan.
There is no way to run LaserScript without the Dongle I'm afraid!
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
Bluestorms
- Posts: 13
- Joined: Thu Dec 20, 2018 7:15 pm
- Contact:
Re: Lasercut Help Required
Thanks for that, the laser was running yesterday, started it up today and there is a yellow mark under usb in device manager, and when I plug the usb into the pc it says cant reconise the device. Any help would be great. I have read that I need the LT Slave USB(68013A) Driver
Last edited by Bluestorms on Sun Dec 30, 2018 9:57 am, edited 1 time in total.
Re: Lasercut Help Required
Did you get the HPC installation disk?
If so the USB software should be included and needs to be installed.
Cheers
Dave
If so the USB software should be included and needs to be installed.
Cheers
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
Bluestorms
- Posts: 13
- Joined: Thu Dec 20, 2018 7:15 pm
- Contact:
Re: Lasercut Help Required
Yes I have the installation disc and have installed it, and like I said it was working yesterday no problems.
Re: Lasercut Help Required
Tried a different USB port?
Does the error go when you unplug the USB and come back when plugged in?
Did Windows Update after installing?
Does the error go when you unplug the USB and come back when plugged in?
Did Windows Update after installing?
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
Bluestorms
- Posts: 13
- Joined: Thu Dec 20, 2018 7:15 pm
- Contact:
Re: Lasercut Help Required
So when connected and in Lasercut you try to download a file it comes up with the error?
Tried another USB cable?
Tried another USB cable?
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
Bluestorms
- Posts: 13
- Joined: Thu Dec 20, 2018 7:15 pm
- Contact:
-
Bluestorms
- Posts: 13
- Joined: Thu Dec 20, 2018 7:15 pm
- Contact:
Re: Lasercut Help Required
Tried another usb cable that runs my cutter no problems and get the error usb not reconised.
Who is online
Users browsing this forum: Ahrefs [Bot] and 3 guests