Hello from Ireland & Help with water tank setup
-
- Posts: 1
- Joined: Tue Nov 24, 2020 2:19 pm
- Contact:
Hello from Ireland & Help with water tank setup
Hello everyone, I am just after buying a LS3040 machine and in the middle of setting it up. Does anyone have a photo of the water tank all piped up that they could send me? Thanks in advance. Laura
Re: Hello from Ireland & Help with water tank setup
If no chiller then pipe from back of machine that says 'in' goes to pump that sits in the water reservoir.
Pipe that says 'out' goes to reservoir.
So the water comes from the pump into the tube (the end with no lens/mirror) through the tube and back into the reservoir.
Best
Dave
Pipe that says 'out' goes to reservoir.
So the water comes from the pump into the tube (the end with no lens/mirror) through the tube and back into the reservoir.
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Who is online
Users browsing this forum: No registered users and 0 guests