This list is what I have found to give best results. I use a counter on the power control knob so the number relates to 'Number of turns'.
Felt = P 0.80 50mms
Laminate
Engrave = P 0.80 100mms
Cut = P 1.15 30mms 2 passes
Rubber
Engrave = P 4.80 80mms 2 passes
2mm Acrylic = P 3.60 15mms
3mm Acrylic = P 3.25 10mms
5mm Arcylic = P 5.30 10mms
3mm Ply = P 4.00 15mms
3mm MDF = P 3.90 15mms
LS3020 power settings
LS3020 power settings
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Who is online
Users browsing this forum: No registered users and 0 guests